### ANNOUNCED GATE UPCOMING BATCHES

REGULAR BATCHES | LOCATION |
---|---|

18 May | PUNE |

2 June | PUNE |

2 July | PUNE |

2 Aug | PUNE |

WEEKEND BATCHES | LOCATION |
---|---|

2 January | PUNE |

3 February | PUNE |

5 June | PUNE |

2 July | PUNE |

Crash Course | LOCATION |
---|---|

18 May | PUNE |

2 June | PUNE |

1 Nov | PUNE |

Last Five year cut-off of GATE exam | ||||
---|---|---|---|---|

Mechanical Engineering | No of students Appeared | GENERAL | OBC | SC/ST |

2011 | 81175 | 30.81 | 27.73 | 20.54 |

2012 | 112320 | 27.14 | 24.47 | 18.09 |

2013 | 165814 | 25 | 22.5 | 16.67 |

2014 | 185578 | 28.86 | 25.97 | 19.24 |

2015 | 185758 | 32.73 | 29.46 | 21.82 |

**Cut-off list of IITs and PSUs**

Name | Rank should be less than (General Category) |
---|---|

IISC Bangalore | 50 |

IIT Mumbai | 100 |

IIT Kanpur | 200 |

IIT Delhi | 300 |

IIT Madras | 350 |

IIT Kharagpur | 400 |

IIT Roorkee | 600 |

IIT Guwahati | 650 |

IIT Hyderabad | 1000 |

IIT Ahmedabad | 1100 |

Company | Approx Package |
---|---|

ONGC | 13 Lakhs |

IOCL | 12 Lakhs |

NTPC | 12 Lakhs |

GAIL | 12 Lakhs |

CIL | 13 Lakhs |

BHEL | 8.7Lakhs |

HPCL | 8.5Lakhs |

BPCL | 12Lakhs |

**ME Mechanical Engineering**

**Section 1: Engineering Mathematics**

**Linear Algebra:**Matrix algebra, systems of linear equations, eigenvalues and eigenvectors.

**Calculus:** Functions of single variable, limit, continuity and differentiability, mean value theorems, indeterminate forms; evaluation of definite and improper integrals; double and triple integrals; partial derivatives, total derivative, Taylor series (in one and two variables), maxima and minima, Fourier series; gradient, divergence and curl, vector identities, directional derivatives, line, surface and volume integrals, applications of Gauss, Stokes and Green’s theorems.

**Differential equations:** First order equations (linear and nonlinear); higher order linear differential equations with constant coefficients; Euler-Cauchy equation; initial and boundary value problems; Laplace transforms; solutions of heat, wave and Laplace's equations.

**Complex variables:** Analytic functions; Cauchy-Riemann equations; Cauchy’s integral theorem and integral formula; Taylor and Laurent series.

**Probability and Statistics:** Definitions of probability, sampling theorems, conditional probability; mean, median, mode and standard deviation; random variables, binomial, Poisson and normal distributions.

**Numerical Methods:** Numerical solutions of linear and non-linear algebraic equations; integration by trapezoidal and Simpson’s rules; single and multi-step methods for differential equations.

**Section 2: Applied Mechanics and Design**

**Engineering Mechanics:** Free-body diagrams and equilibrium; trusses and frames; virtual work; kinematics and dynamics of particles and of rigid bodies in plane motion; impulse and momentum (linear and angular) and energy formulations, collisions.

**Mechanics of Materials:** Stress and strain, elastic constants, Poisson's ratio; Mohr’s circle for plane stress and plane strain; thin cylinders; shear force and bending moment diagrams; bending and shear stresses; deflection of beams; torsion of circular shafts; Euler’s theory of columns; energy methods; thermal stresses; strain gauges and rosettes; testing of materials with universal testing machine; testing of hardness and impact strength.

**Theory of Machines:** Displacement, velocity and acceleration analysis of plane mechanisms; dynamic analysis of linkages; cams; gears and gear trains; flywheels and governors; balancing of reciprocating and rotating masses; gyroscope.

**Vibrations:** Free and forced vibration of single degree of freedom systems, effect of damping; vibration isolation; resonance; critical speeds of shafts. Machine Design: Design for static and dynamic loading; failure theories; fatigue strength and the S-N diagram; principles of the design of machine elements such as bolted, riveted and welded joints; shafts, gears, rolling and sliding contact bearings, brakes and clutches, springs. Section

**3: Fluid Mechanics and Thermal Sciences**

**Fluid Mechanics:** Fluid properties; fluid statics, manometry, buoyancy, forces on submerged bodies, stability of floating bodies; control-volume analysis of mass, momentum and energy; fluid acceleration; differential equations of continuity and momentum; Bernoulli’s equation; dimensional analysis; viscous flow of incompressible fluids, boundary layer, elementary turbulent flow, flow through pipes, head losses in pipes, bends and fittings.

**Heat-Transfer:** Modes of heat transfer; one dimensional heat conduction, resistance concept and electrical analogy, heat transfer through fins; unsteady heat conduction, lumped parameter system, Heisler's charts; thermal boundary layer, dimensionless parameters in free and forced convective heat transfer, heat transfer correlations for flow over flat plates and through pipes, effect of turbulence; heat exchanger performance, LMTD and NTU methods; radiative heat transfer, StefanBoltzmann law, Wien's displacement law, black and grey surfaces, view factors, radiation network analysis.

**Thermodynamics:** Thermodynamic systems and processes; properties of pure substances, behaviour of ideal and real gases; zeroth and first laws of thermodynamics, calculation of work and heat in various processes; second law of thermodynamics; thermodynamic property charts and tables, availability and irreversibility; thermodynamic relations.

**Applications:** Power Engineering: Air and gas compressors; vapour and gas power cycles, concepts of regeneration and reheat. I.C. Engines: Air-standard Otto, Diesel and dual cycles. Refrigeration and air-conditioning: Vapour and gas refrigeration and heat pump cycles; properties of moist air, psychrometric chart, basic psychrometric processes. Turbomachinery: Impulse and reaction principles, velocity diagrams, Pelton-wheel, Francis and Kaplan turbines. **Section 4: Materials, Manufacturing and Industrial Engineering**

**Engineering Materials:** Structure and properties of engineering materials, phase diagrams, heat treatment, stress-strain diagrams for engineering materials.

**Casting, Forming and Joining Processes:** Different types of castings, design of patterns, moulds and cores; solidification and cooling; riser and gating design. Plastic deformation and yield criteria; fundamentals of hot and cold working processes; load estimation for bulk (forging, rolling, extrusion, drawing) and sheet (shearing, deep drawing, bending) metal forming processes; principles of powder metallurgy. Principles of welding, brazing, soldering and adhesive bonding.

**Machining and Machine Tool Operations:** Mechanics of machining; basic machine tools; single and multi-point cutting tools, tool geometry and materials, tool life and wear; economics of machining; principles of non-traditional machining processes; principles of work holding, design of jigs and fixtures.

**Metrology and Inspection:** Limits, fits and tolerances; linear and angular measurements; comparators; gauge design; interferometry; form and finish measurement; alignment and testing methods; tolerance analysis in manufacturing and assembly.

**Computer Integrated Manufacturing:** Basic concepts of CAD/CAM and their integration tools. Production Planning and Control: Forecasting models, aggregate production planning, scheduling, materials requirement planning.

**Inventory Control:** Deterministic models; safety stock inventory control systems.

**Operations Research:** Linear programming, simplex method, transportation, assignment, network flow models, simple queuing models, PERT and CPM.